Design of Ready-to-Drink Coffee Product Packaging Using Kansei Engineering Method and Eye Tracking

Aprilia Tri Purwandari(1*), Moza Aisyah Yasmin(2), Budi Aribowo(3),


(1) Universitas Al-Azhar Indonesia
(2) Universitas Al-Azhar Indonesia
(3) Universitas Al-Azhar Indonesia
(*) Corresponding Author

Abstract


Packaging plays an important role in enhancing a product's competitiveness. Therefore, the aim of this research is to design attractive packaging for ready-to-drink coffee that will boost the company's competitiveness in selling such products, especially for Micro, Small, and Medium Enterprises (MSME), which face tough competition from both local and international companies. The objective of this research is to design ready-to-drink coffee packaging that caters to consumer preferences using Kansei Engineering and Eye Tracking. Based on the analysis using Kansei Engineering and Eye Tracking methods, two packaging recommendations for ready-to-drink coffee were obtained. If the company wants to focus on environmentally friendly packaging design, use bulb-shaped packaging made of glass, with a medium size of 300-350 ml, a monochrome label that provides detailed information and attached with pictures, based on the results of the Kansei Engineering analysis. On the other hand, if the focus is on aesthetics, the company should use bulb-shaped packaging made of plastic, with a medium size of 300-350 ml, a monochrome label that provides detailed information and attached with pictures, based on the results of the Eye-tracking analysis. 

Keywords - Conjoint Analysis, Eye Tracking, Kansei Engineering, Packaging, Ready-to-Drink Coffee.


Full Text:

PDF

References


M. Abdullah, A. Kalam, S.M. Akterujjaman. 2013, “Packaging Factors Determining Consumer Buying Decision,” International Journal of Humanities and Management Sciences (IJHMS), vol. 1, no. 5, pp. 2320–4036, 2018, [Online]. Available: https://papers.ssrn.com/sol3/papers.cfm?abstract_id=2732231.

N. H. Hermawati, Herdiana and N. Mappanganro, "The Influence of the Coffee Business on Farmers Income at Mentari," International Journal of Sharia Business Management (IJSBM), vol. 2, no. 2, pp. 64-68, 2023.

Badan Pusat Statistik, “Ekspor Kopi Menurut Negara Tujuan Utama, 2000-2021,” 2022, [Online]. Available: https://www.bps.go.id/statictable/2014/09/08/1014/ekspor-kopi-menurut-negara-tujuan-utama-2000-2020.html

D. Bayu, “Berapa Konsumsi Kopi Indonesia pada 2020/2021,” 2022, [Online]. Available: https://dataindonesia.id/sektor-riil/detail/berapa-konsumsi-kopi-indonesia-pada-20202021

V. Marques da Rosa, C. Spence, and L. Miletto Tonetto, “Influences of visual attributes of food packaging on consumer preference and associations with taste and healthiness,” Int. J. Consum. Stud., vol. 43, no. 2, pp. 210–217, Mar. 2019, doi: 10.1111/ijcs.12500.

D. Faisal, L. D. Fathimahhayati, and F. D. Sitania, “Penerapan Metode Kansei Engineering Sebagai Upaya Perancangan ulang Kemasan Takoyaki (Studi Kasus: Takoyakiku Samarinda),” vol. 18, no. 1, p. p-ISSN, 2021

G. Franken, “Packaging design and testing by eye tracking,” in International Symposium on Graphic Engineering and Design, 2020, pp. 347–354. doi: 10.24867/GRID-2020-p38.

S. Uma and R. Bougie, Reseach Method for Business : A Skill-Building Approach, 4 ed., New York: John Wiley & Sons, 2003.

D. S. Utomo, “Perancangan Ulang Fasilitas Belajar Pada Taman Kanak-Kanak Dengan Menggunakan Metode Kansei Engineering (Studi Kasus TK Islam Silmi Samarinda),” Seminar Nasional IENACO 2017, pp. 1–7, 2017.

R. Pratiwi and A. Nizam, “Pengaruh Desain Kemasan Produk dan Daya Tarik Iklan terhadap Keputusan Pembelian yang Dimediasi oleh Kesadaran Merek Air Minum Cleo di Kota Banda Aceh,” Jurnal Ilmiah Mahasiswa Ekonomi Manajemen, vol. 6, no. 3, pp. 563–576, 2021, [Online]. Available: http://www.jim.unsyiah.ac.id/EKM/article/view/17697

M. P. Murniati, St. V. Purnamasari, S.D.A. Ratnaningsih, A. Advensia, R. Sihombing, and Y. Wirastuti, “Alat-alat Pengujian Hipotesis,” 2013, Accessed: Aug. 17, 2022. [Online]. Available: https://lib.unika.ac.id/index.php?p=show_detail&id=48433&keywords=

S. Guan and T. Tung, “A Study on Kansei Emotion of Illustrative Style for Icon Design Using Conjoint Analysis,” 2007.

A and D. S. Adhi, “Analisis konjoin full-profile untuk mengetahui feature telepon selular yang ideal dipasarkan di kecamatan banyumanik,” SEWINDU Statistika - Univesrtias Diponegoro, pp. 978–979, 2011.

D. Martinez-Marquez, S. Pingali, K. Panuwatwanich, R. A. Stewart, and S. Mohamed, “Application of eye tracking technology in aviation, maritime, and construction industries: A systematic review,” Sensors, vol. 21, no. 13, pp. 1–40, 2021, doi: 10.3390/s21134289.

RealEye, "Online Research Platform with Webcam Eye-Tracking," RealEye, [Online]. Available: https://support.realeye.io/free-trial. [Accessed 17 Juli 2022]

J. Y. Cho and J. Suh, “Spatial Color Efficacy in Perceived Luxury and Preference to Stay: An Eye-Tracking Study of Retail Interior Environment,” Front Psychol, vol. 11, no. March, pp. 1–15, 2020, doi: 10.3389/fpsyg.2020.00296.




DOI: http://dx.doi.org/10.36722/sst.v10i2.4124

Refbacks

  • There are currently no refbacks.


LP2M (Lembaga Penelitian dan Pengembangan Masyarakat)

Universitas AL-AZHAR INDONESIA, Lt.2 Ruang 207

Kompleks Masjid Agung Al Azhar

Jl. Sisingamangaraja, Kebayoran Baru

Jakarta Selatan 12110

Visitor

 This work is licensed under CC BY 4.0