Evaluation of Critical Success Factors in The Indonesian Automotive Industry using DEMATEL-Based ANP to Implement Green Supply Chain Management

Max Dewar Rivero, Romadhani Ardi

Abstract


 Analysis of Indonesian car production data in 2022 shows significant trend for increase in production and sales from year to year. The automotive industry in Indonesia is currently an important non-oil and gas sector which has a major contribution to the national economy. Currently, Indonesia has 22 four-wheeled motor vehicle industry companies. The higher the level of car production, the higher the CO2 emissions produced, and the higher the worldwide pressure to the countries to reduce the CO2 emission damage. Therefore car companies must implement Green Supply Chain Management (GSCM). However, the many criteria in GSGM implementation make it difficult for industry players to decide on the appropriate strategic decisions. The aim of this study is to find out the critical success factors in implementing GSCM in the Indonesian automotive industry and their interrelationship. The method used in this study is the Decision Making Trial and Evaluation Laboratory (DEMATEL) based on the Analytic Network Process (ANP). The results of this study show that the top five of 25 critical success factor in global weight are: top management perspective 4.86%, company competitiveness 4.57%, economic interest 4.55%, Using energy-efficient machinery and equipment 4.49% and Carbon footprint identification 4.48%.

Keywords - Automotive Industry, Critical Success Factors, DEMATEL Based ANP, Green Supply Chain Management.


Full Text:

PDF

References


S. Zailani, K. Govindan, M. Iranmanesh, M. R. Shaharudin, dan Y. Sia Chong, “Green innovation adoption in automotive supply chain: The Malaysian case,” J. Clean. Prod., vol. 108, hal. 1115–1122, Des 2015, doi: 10.1016/j.jclepro.2015.06.039.

S. Mitra dan P. P. Datta, “Adoption of green supply chain management practices and their impact on performance: An exploratory study of Indian manufacturing firms,” Int. J. Prod. Res., vol. 52, no. 7, hal. 2085–2107, 2014, doi: 10.1080/00207543.2013.849014.

“Per Capita Green house Gas (GHG) Emissions Below G20 Average Recents Developments, Indonesia, 2022.”

https://www.climate-transparency.org/wp content/uploads/2022/10/CT2022-Indonesia-Web.pdf (Diakses pada 8 November 2023).

E. Drohomeretski, S. G. Da Costa, dan E. P. De Lima, “Green supply chain management: Drivers, barriers and practices within the Brazilian automotive industry,” J. Manuf. Technol. Manag., vol. 25, no. 8, hal. 1105–1134, Sep 2014, doi: 10.1108/JMTM-06-2014-0084.

A. Ghadge, D. G. Mogale, M. Bourlakis, L. M. Maiyar, dan H. Moradlou, “Link between Industry 4.0 and green supply chain management: Evidence from the automotive industry,” Comput. Ind. Eng., vol. 169, Jul 2022, doi: 10.1016/j.cie.2022.108303.

I. M. S. K. Cyrillus Harinowo, Menuju Zaman Renewable Energy. Gramedia Pustaka Utama, 2022.

Kemenperin, “Industri Otomotif Jadi Sektor Andalan Ekonomi Nasional,” https://www.kemenperin.go.id/artikel/22297/Menperin:-Industri-Otomotif-Jadi-Sektor-Andalan-Ekonomi-Nasional. (Diakses pada 25 November 2023).

Asean Automotive Federation, “AAF_Statistics_2022_Car Sales & Production,” 2022.

https://www.gaikindo.or.id/indonesian-automobile-industry-data. (Diakses pada 10 November 2023).

R. Lenort, P. Wicher, dan F. Zapletal, “On influencing factors for Sustainable Development goal prioritisation in the automotive industry,” J. Clean. Prod., vol. 387, Feb 2023, doi: 10.1016/j.jclepro.2022.135718.

A. Banik, H. M. M. Taqi, S. M. Ali, S. Ahmed, M. Garshasbi, dan G. Kabir, “Critical success factors for implementing green supply chain management in the electronics industry: an emerging economy case,” Int. J. Logist. Res. Appl., vol. 25, no. 4–5, hal. 493–520, 2022, doi: 10.1080/13675567.2020.1839029.

S. Kubler, J. Robert, W. Derigent, A. Voisin, dan Y. Le Traon, “A state-of the-art survey & testbed of fuzzy AHP (FAHP) applications,” Expert Syst. Appl., vol. 65, hal. 398–422, Des 2016, doi: 10.1016/j.eswa.2016.08.064.

S. Gandhi, S. K. Mangla, P. Kumar, dan D. Kumar, “A combined approach using AHP and DEMATEL for evaluating success factors in implementation of green supply chain management in Indian manufacturing industries,” Int. J. Logist. Res. Appl., vol. 19, no. 6, hal. 537–561, Nov 2016, doi: 10.1080/13675567.2016.1164126.

N. Hietschold, R. Reinhardt, dan S. Gurtner, “Measuring critical success factors of TQM implementation successfully-a systematic literature review,” Int. J. Prod. Res., vol. 52, no. 21, hal. 6254–6272, Nov 2014, doi: 10.1080/00207543.2014.918288.

C. C. Chen, H. S. Shih, H. J. Shyur, dan K. S. Wu, “A business strategy selection of green supply chain management via an analytic network process,” Comput. Math. with Appl., vol. 64, no. 8, hal. 2544–2557, Okt 2012, doi: 10.1016/j.camwa.2012.06.013.

S. Luthra, D. Garg, dan A. Haleem, “An analysis of interactions among critical success factors to implement green supply chain management towards sustainability: An Indian perspective,” Resour. Policy, vol. 46, hal. 37–50, Des 2015, doi: 10.1016/j.resourpol.2014.12.006.

M. S. B. Yusoff, “ABC of Content Validation and Content Validity Index Calculation,” Educ. Med. J., vol. 11, no. 2, hal. 49–54, Jun 2019, doi: 10.21315/eimj2019.11.2.6.

G.A.D. Sugiharni, “Pengujian Validitas Konten Media Pembelajaran Interaktif Berorientasi Model Creative Problem Solving,” 2018.

D. Kovacic, “Using the Content Validity Index to Determine Content Validity of an Instrument Assessing Health Care Providers’ General Knowledge of Human Trafficking,” J. Hum. Traffick., vol. 4, no. 4, hal. 327–335, Okt 2018, doi: 10.1080/23322705.2017.1364905.

S. N. Izzati, R. Ardi, S. Kim, dan S. A. Putri, “Evaluating Drivers and Barriers of Integrated Waste Management System Implementation in Indonesian Construction Industry: A DEMATEL-Based Analytical Network Process,” Sustain. , vol. 16, no. 6, Mar 2024, doi: 10.3390/su16062264.

E. Almanasreh, R. Moles, dan T. F. Chen, “Evaluation of methods used for estimating content validity,” Res. Soc. Adm. Pharm., vol. 15, no. 2, hal. 214–221, 2019, doi: 10.1016/j.sapharm.2018.03.066.

J. L. Yang dan G. H. Tzeng, “An integrated MCDM technique combined with DEMATEL for a novel cluster-weighted with ANP method,” Expert Syst. Appl., vol. 38, no. 3, hal. 1417–1424, Mar 2014, doi: 10.1016/j.eswa.2010.07.048.

H. Taherdoost dan M. Madanchian, “Analytic Network Process (ANP) Method: A Comprehensive Review of Applications, Advantages, and Limitations,” J. Data Sci. Intell. Syst., vol. 1, no. 1, hal. 12–18, Mei 2023, doi: 10.47852/bonviewJDSIS3202885.

S. Khan, A. Maqbool, A. Haleem, dan M. I. Khan, “Analyzing critical success factors for a successful transition towards circular economy through DANP approach,” Manag. Environ. Qual. An Int. J., vol. 31, no. 3, hal. 505–529, Apr 2020, doi: 10.1108/MEQ-09-2019-0191.




DOI: http://dx.doi.org/10.36722/sst.v10i1.2957

Refbacks

  • There are currently no refbacks.


LP2M (Lembaga Penelitian dan Pengembangan Masyarakat)

Universitas AL-AZHAR INDONESIA, Lt.2 Ruang 207

Kompleks Masjid Agung Al Azhar

Jl. Sisingamangaraja, Kebayoran Baru

Jakarta Selatan 12110

Visitor

 This work is licensed under CC BY 4.0