Analisis Jumlah Lilitan dan Variasi Material Inti Besi Stator Rotor Terhadap Efisiensi Permanent Magnet Synchronous Generator 24 Slot 16 Pole Fluks Radial

Fikri Hidayah, Novi Gusnita

Abstract


Effort to replace increasingly limited fossil energy sources, new renewable energy (EBT) can be the right solution. This type of energy comes from natural resources that can be renewed continuously, such as wind energy. Permanent Magnet Synchronous Generator (PMSG) technology can be used optimally in wind turbines. However, research on the efficiency of this technology is still not optimal in terms of reducing energy consumption, power losses and operational costs. Therefore efforts are needed to increase generator efficiency. The generator is the main component of converting wind energy into electrical energy. The research was conducted on a 24 slot 16 pole permanent magnet synchronous generator type using the Finite Element Method (FEM) with 3 variations of the number of turns of 35, 50, 65 and variations of the stator rotor iron core material: TR 52: USS Transformer, Remko Soft: Pure, M1000-100A Silicon Steel. This research resulted in the highest current value of 9.92 Amperes, the highest voltage value was 99.2 volts, the value of the input power was 1199.2 Watts and the output power was 1014 Watts on the number of turns of 65 coils and Remko material: soft pure and for efficiency the best is obtained at a value of 87.20% on the number of turns of 50 turns and Remko material: Soft Pure.

Keywords – PLTB, Generator, Coil, Iron Core, Permeability Magnet.


Full Text:

PDF

References


Suharyati, N. Kristanto, S. Hesti Pambudi and dkk, “Indonesia Energy Outlook (IEO),” in -, -, 2021.

I. M. Astra, “Energi Dan Dampaknya Terhadap Lingkungan,” Jurnal Meteorologi dan Geofisika, vol. 11, no. 2, pp. 131-139, 2010.

T. P. Zaputra, Gusnita and Novi, “Analisis Pengaruh Jumlah Lilitan dan Kecepatan Putar Terhadap Efisiensi Pada Permanent Magnet Synchronus Generator 18 Slot 16 Pole,” Jurnal Teknik Elektro dan Vokasional, vol. 8, no. 2, pp. 411-419, 2022.

P. RI, “Database Peraturan,” Pemerintah, 17 Oktober 2014. [Online]. Available: https://peraturan.bpk.go.id/Details/5523/pp-no-79-tahun-2014.

R. Saputra and Z. Aini, “Analisis Pengaruh Ketebalan dan Jenis Inti Besi Rotor dan Stator terhadap Karaktersitik Generator Sinkron Magnet Permanen 18S16P Fluks Radial,” Jurnal Sains, Teknologi, dan Industri, vol. 18, no. 2, pp. 220-227, 2021.

M. A. Irawan, “Perancangan Generator Dengan Variasi Slot, Pole, Dan Lilitan Menggunakan Software Magnet,” Universitas Teknologi Yogyakarta, Yogyakarta, 2019.

Liliana, Z. Aini, A. Wenda and T. D. Putri, “Effect of Thickness and Type of Magnet against EMF Back PMSG 12S8P with FEM,” in IPO Conference Series, Padang, 2020.

A. S. A. Farisi, A. Wenda, Liliana and N. P. Miefthawati, “Analisa Pengaruh Jumlah Lilitan Stator Terhadap Generator Magnet Permanen Fluks Radial Tiga Fasa,” Power Elektronik : Jurnal Orang Elektro, vol. 10, no. 2, pp. 65-67, 2021.

Yasyak and M. Ibnu, “Analisa permeabilitas material stator pada pemodelan permanent magnet synchronous generator 12 slot 8 pole menggunakan finite element method,” Universitas Muhammadiyah Surakarta, Surakarta, 2021.

M. Abdullah, “Bab 6 GGL INDUKSI dan INDUKTANSI,” in Fisika Dasar II, Bandung, Kampus Ganesa, 2017, pp. 410-479.

“Analisa Efisiensi dan Rancang Generator Permanent Magnet 12 Slot 8 Pole Menggunakan Software Magnet 7.5,” in Seminar Nasional Microwave, Antena dan Propagasi (SMAP), Bogor, 2018.

H. Piggott and J. Blow, Windpower workshop, United Kingdom: Centre for Alternative Technology, 2020.

M. Sumantri and S. Nuryadi, “Analisis Pengaruh Variasi Slot Dan Pole Terhadap Tegangan Dan Efisiensi Daya Pada Perancangan Generator Magnet Permanen Menggunakan Software Magnet,” Universitas Teknologi Yogyakarta, Universitas Teknologi Yogyakarta, 2019.

Herudin and W. D. Prasetyo, “Rancang Bangun Generator Sinkron 1 Fasa Magnet Permanen Kecepatan Rendah 750 RPM. Setrum Sist. Kendali-Tenaga-elektronika-telekomunikasi-komputer,” Jurnal Ilmiah SETRUM, vol. 5, no. 1, pp. 11-15, 2016.

G. Setiawan, “BAB II Tinjauan Pustaka BAB II TINJAUAN PUSTAKA 2.1.,” 2019, pp. 1-64.




DOI: http://dx.doi.org/10.36722/sst.v8i3.1925

Refbacks

  • There are currently no refbacks.


LP2M (Lembaga Penelitian dan Pengembangan Masyarakat)

Universitas AL-AZHAR INDONESIA, Lt.2 Ruang 207

Kompleks Masjid Agung Al Azhar

Jl. Sisingamangaraja, Kebayoran Baru

Jakarta Selatan 12110

Visitor