Physical Properties of Bioplastic Composite Synthesized from Sago Waste and Betung Bamboo Activated Carbon

Aprilianda Aprilianda, Ismail Budiman, Mersi Kurniati, Yessie Widya Sari

Abstract


Bioplastics are expected to reduce the use of commercial plastics. Several efforts have been made to improve the properties of bioplastics, including the addition of antioxidants or antimicrobial agents. One of the antimicrobial agents is activated charcoal or activated carbon. This study was aimed to investigate the effect of activated carbon addition to the bioplastic composite. Sago waste was utilized as the matrix in the composite, while activated carbon was as filler. Sago waste is the leftover biomass resulted from the sago extraction. The proximate analysis showed that the composition of sago waste was mostly dominated by the fibrous materials followed by protein and fat. The activated carbon was obtained from the treatment of Betung bamboo. The Fourier Transform Infrared (FTIR) spectroscopy indicated that the thermal treatment of Betung bamboo at 175 °C for 5 h resulted The treated sago waste  was immersed in 5% KOH  for 24 h and further dried and then pyrolyzed at 750 °C for 90 min to yield activated carbon. The activated carbon was dominated by the carbonaceous materials. This was also supported by the proximate data indicating the presence of 91% carbonaceous materials in activated carbon.  The Brunauer Emmett Teller (BET) analysis showed that the activated carbon has surface area of 460 m2/g. This activated carbon was then used as filler at bioplastic composites. Two levels of activated carbon percentage on composite were tested, which were 3-5% (% m/v). The mechanical analysis using universal testing machine indicated that the addition of activated carbon reduces the tensile strength and modulus of elasticity. The scanning electron microscopy (SEM) images clearly indicated the presence of activated carbon on the surface of bioplastics.  The data obtained in this study showed the potential of composite sago waste and activated carbon as bioplastics. Further, the activated carbon obtained in this study can serve as an adsorbent, providing possible applications as antibacterial agent. 

Keywords – Activated Carbon, Biomass, Bioplastic, Composite, Pyrolysis, Sago Waste.


Full Text:

PDF

References


I. Nofiyanto, “Pembuatan plastik biodegradable dari limbah bonggol pisang kepok dengan plasticizer gliserol dari minyak jelantah dan komposit kitosan dari limbah cangkang bekicot (achatina fullica),” Integrated Lab Journal, vol. 7, no. 1, pp. 75-89, April 2019.

J. Jeevahan, M. Chandrasekaran, R. B. Durairaj, G. Mageshwaran, and G. B. Joseph, ”A brief review on edible food packing materials,” Journal of Global Engineering Problems and Solutions, vol. 1, no. 1, pp. 9-19, October 2017.

I. Sangaj, Mengoptimalkan Pemanfaatan Ampas Sagu sebagai Pakan Ruminansia Melalui Biofermentasi dengan Jamur Tiram (Pleurotus ostreatus) dan Amoniasi. Bogor: ID, 2009.

S. Guilbert, M. H. Morel, N. Gontard, and B. Cuq, “Protein-Based Plastics and Composites as Smart Green Materials,” American Chemical Society, vol. 921, pp. 335-339, January 2006.

T. Janjarasskul and J. M. Krochta, ”Edible packaging materials,” Annual Review of Food Science and Technology, vol. 1, pp. 415-448, January 2010.

M. Hijriawati and E. Febrina, “Review: edible film antimikroba,” Farmaka, vol. 14, no. 1, pp. 8-16, 2016.

D. Z. Suput, V. L. Lazic, S. Z. Popovic, and N. M. Hromis, “Edible films and coatings-sources, properties and application,” Food and Feed Research, vol. 42, no. 1, pp. 11-22, 2015.

I. Budiman, D. Hermawan, F. Febrianto, G. Pari, and Subyakto, “Char properties and pollutant adsorption capability of oil palm shell using hydrothermal process,” Biomass Conversion and Biorefinery, vol. 9, pp. 681-688, March 2019.

M. O. Ilomuanya, B. Nashiru, N. D. Ifudu, and C. I. Igwilo, “Effect of pore and morphology of activated charcoal prepared from midribs of elaeis guineensis on absorption of poisons using metronidazole and escherichia coli O517:H7 as a case study,” J. Microsc. Ultrastruct., vol. 5, no. 1, pp. 32-38, May 2016.

M. S. Choi and A. K. Suk, “Antibacterial effect of bamboo charcoal on streptococcus mutans,” J. Korean. Soc. Dent. Hyg., vol. 14 no.1 pp. 95-100, 2014.

I. Budiman, Development of Self-Healing Mortar Made from Oil Palm Shell and Oil Palm Empty Fruit Bunches. Bogor: ID, 2019.

Z. Heidarinejad, M. H. Dehghani, M. Heidari, G. Javedan, I. Ali, and M. Sillanpa, “Methods for preparation and activation of activated carbon: a review,” Environmental Chemistry Letters, vol. 18, pp. 393-415, January 2020.

A. Bahtiar, M. Kurniati, Y. W. Sari, and C. Winarti, “Surface morphology and water vapour transmission rate analysis of protein-based bioplastic,” IOP Conf. Ser.: Earth Environ. Sci. vol. 187, pp. 012015, 2018.

F. Y. Maula, Optimasi Sintesis Bioplastik dari Protein Sorgum dan Nanosilika untuk Aplikasi Pengemas Pangan. Bogor: ID, 2020.

T. Adelina, “Pengaruh komposisi substrat dan dosis inokulum laru terhadap nilai gizi ampas sagu (Metroxylon sp) fermentasi,” Jurnal Petemakan, vol. 5, no. 2, pp. 71-74, September 2008.

S. Nizamuddin, N. S. Jayakumar, J. N. Sahu, P. Ganesan, A. W. Bhutto, and N. M. Mubarak, “Hydrothermal carbonization of oil palm shell,” Korean Journal of Chemical Engineering, vol. 32, no. 9, pp. 1789-1797, May 2015.




DOI: http://dx.doi.org/10.36722/sst.v8i3.1885

Refbacks

  • There are currently no refbacks.


LP2M (Lembaga Penelitian dan Pengembangan Masyarakat)

Universitas AL-AZHAR INDONESIA, Lt.2 Ruang 207

Kompleks Masjid Agung Al Azhar

Jl. Sisingamangaraja, Kebayoran Baru

Jakarta Selatan 12110

Visitor