Analisis Potensi Kegagalan Jenis Defect Dominan Pada Transmission Case Dan Clutch Housing Menggunakan Metode FMEA-TOPSIS

Daffa Amara Dzikri, Nunung Nurhasanah


PT. Mitsubishi Krama Yudha Motors and Manufacturing Engine Factory, or PT. MKM 1 manufactures the TD-4V21 engine for canters and engine parts such as crankcase and timing gear, transmission, front axle, and differential case. This research was conducted at PT. MKM 1 on the Transmission Case and Clutch Housing production line aims to identify the dominant type of defect, analyze the potential causes of failure using the Failure Mode Effect and Analysis (FMEA) method, and determine the priority causes of failure to be repaired using the Technique for Others Reference by Similarity to the method. Ideal Solution (TOPSIS). In the production of TMTD & CLH, there are three dominant types of defects based on the application of the Pareto diagram, namely, the result of the NG thread process is 42%, the hole diameter plus-minus is 23%, and the outspent position is 13%. There are causes of failure that need to be addressed based on the analysis of the Ishikawa diagram and the application of the FMEA-TOPSIS method. In the results of the NG thread process, the causes of failure that need to be overcome are the wrong settings for tools, parts, or materials that are not smooth, there are iron ores. On the defect hole diameter plus-minus, try ex tool insert, loose bolt insert tool, and overspec tool dimension. While the outspent position there are causes of failure that need to be overcome, namely the length of the part over, improvements to the-axisscale, and panel brackets that are accidentally turned off.

KeywordsQuality improvement, FMEA, TOPSIS, Diagram Ishikawa, Failure Mode Effect And Analysis, Technique For Others Reference By Similarity To Ideal Solution.

Full Text:



R. Putra Perdana and E. Yuliawati, “Integrasi Metode FMEA Dan TOPSIS Untuk Menganalisis Risiko Kecelakaan Pada Proses Frame And Fork Welding,” 2014.

Onur and Muhammed Kabak, “The Usahe of MCDM Techniques in Failure Mode Effect and Analys,” 2015.

S. Saori, “Analisis Pengendalian Mutu Pada Industri Lilin(Studi kasus pada PD.Ikram Nusa Persada Kota Sukabumi),” Jurnal Inovasi Penelitian, vol. 1, 2021.

G. Suci Ramadhani, “Analisis Pengendalian Kualitas Menggunakan Diagram Kendali Demerit (Studi Kasus Produksi Air Minum Dalam Kemasan 240 ml di PT TIW),” vol. 3, no. 3, pp. 401–410, 2014, [Online]. Available:

L. Liliana, “A New Model of Ishikawa Diagram for Quality Assessment,” in IOP Conference Series: Materials Science and Engineering, Dec. 2016, vol. 161, no. 1. doi: 10.1088/1757-899X/161/1/012099.

R. S. Raman and Y. Basavaraj, “Quality Improvement of Capacitors Through Fishbone and Pareto Techniques,” International Journal of Recent Technology and Engineering, vol. 8, no. 2, pp. 2248–2252, Jul. 2019, doi: 10.3940/ijrte.B2444.078219.

A. Suherman and B. J. Cahyana, “Pengendalian Kualitas Dengan Metode Failure Mode Effect And Analysis,” Seminar Nasional Sains dan Teknologi 2019, 2019.

N. Ardiansyah and H. C. Wahyuni, “Analisis Kualitas Produk Dengan Menggunakan Metode FMEA dan Fault Tree Analisys (FTA) Di Exotic UKM Intako,” PROZIMA (Productivity, Optimization and Manufacturing System Engineering), vol. 2, no. 2, pp. 58–63, Dec. 2018, doi: 10.21070/prozima.v2i2.2200.

T. L. Saaty, “Decision Making With The Analytic Hierarchy Process,” 2008.

Chauliah Fatma Putri, “Pemilihan Supplier Bahan Baku Pengemas Dengan Metode Ahp (Analytical Hierarchy Process),” 2012.

Renaldo Riki, Anggaraeni Elisabet, and E. HC, “Metode Topsis Dalam Sistem Pendukung Keputusan Penentuan Penerimaan Beasiswa Di SMTIK Pringsewu,” Jurnal Management Sis

E. Purnomo, S. Sihwi, and R. Anggrainingsih, “Analisis Perbandingan Menggunakan Metode AHP, TOPSIS, dan AHP-TOPSIS dalam Studi Kasus Sistem Pendukung Keputusan Penerimaan Siswa Program Akselerasi,” Jurnal ITSMART, vol. 2, 2013.



  • There are currently no refbacks.

LP2M (Lembaga Penelitian dan Pengembangan Masyarakat)

Universitas AL-AZHAR INDONESIA, Lt.2 Ruang 207

Kompleks Masjid Agung Al Azhar

Jl. Sisingamangaraja, Kebayoran Baru

Jakarta Selatan 12110