Gage R&R Repeatability and Reproducibility Analysis on Wafer Chocolatos Length Measurement

Muhammad Naufaldi Rasyid(1), Hikmal Abrar(2), Budi Aribowo(3),


(1) Universitas Al-Azhar Indonesia
(2) Universitas Al-Azhar Indonesia
(3) Universitas Al-Azhar Indonesia
(*) Corresponding Author

Abstract


This study aims to evaluate the reliability of a measurement system using the Gage Repeatability and Reproducibility (Gage R&R) method on Chocolatos wafer length measurements. The experiment involved three appraisers, each measuring five wafers with three repeated trials. The collected data were processed through several steps to determine repeatability (EV), reproducibility (AV), and overall measurement system capability (%R&R). The results showed that the %R&R value was 95%, indicating that the gage system is not satisfactory. Furthermore, the repeatability value was higher than the reproducibility value, which suggests that the main source of measurement variation comes from the measuring instrument. Therefore, the gage requires maintenance and possibly redesign. This research highlights the importance of proper calibration and system evaluation to ensure measurement accuracy and reliability.

Full Text:

PDF

References


A. L. Setyabudhi, O. Veza, D. Meldra, N. C. Abdurahman, M. Rizki, And R. Saputra, “Penerapan Metode Measurement System Analysis Gage R & R Pada Pengukuran Produk Base Plate Magazine Jurnal Rekayasa Sistem Industri,” Vol. 6, No. 2, Pp. 86–89, 2021.

S. Marcelina, A. S. Awalluddin, And A. F. Huda, “Analisis Pengukuran Produk Hkzl Pt . Gradien Manufaktur Indonesia Menggunakan Multivariat Gage , Repeatability And Reproducibility ( Grr ) Melalui Analisis Faktor,” Pp. 113–122.

C. Elishian, E. M. Handayani, I. Komalasari, O. Zuas, R. Ketrin, And G. Ginanjar, “Feasibility Study On The Development Of An Indonesian Reference Material For Determination Of Nutrient In Milk,” Pp. 1–9.

K. Knop, “Repeatability And Reproducibility Studies For Non-Replicable Tests,” Vol. 2, No. 1, Pp. 275–284, 2020, Doi: 10.2478/Czoto-2020-0034.

A.- Mu, J. Pendidikan, And B. Arab, “Validitas Dan Reliabilitas Dalam Analisis Butir Soal,” Vol. I, No. 1, Pp. 34–44, 2021.

L. Amanda, F. Yanuar, And D. Devianto, “Partisipasi Politik Masyarakat Kota Padang,” Vol. Viii, No. 1, Pp. 179–188, 2019.

K. T. Pengetahuan And D. A. N. Praktik, “Studi Pendahulan Uji Validitas Dan Reliabilitas Kuesioner Tingkat Pengetahuan, Sikap, Dan Praktik Terhadap Demam Berdarah Dengue Pada Guru Sekolah Dasar Di Kota Mataram”.

P. Kemenkes And S. Jurusan, “Uji Validitas Dan Reliabilitas Alat Ukur Sg Posture Evaluation,” Pp. 55–61.

F. Yusup, P. Studi, T. Biologi, U. Islam, And N. Antasari, “Uji Validitas Dan Reliabilitas Instrumen Penelitian Kuantitatif,” Vol. 7, No. 1, Pp. 17–23, 2018.

P. G. Subhaktiyasa, “Evaluasi Validitas Dan Reliabilitas Instrumen Penelitian Kuantitatif : Sebuah Studi Pustaka,” Vol. 5, No. 4, Pp. 5599–5609.




DOI: http://dx.doi.org/10.36722/exc.v3i1.5518

Refbacks

  • There are currently no refbacks.