Identifikasi Potensi Hazard pada Pengunjung Xplore62 Menggunakan Metode Hazop dan HIRADC

Arya Cahya Nasution(1), Hikmal Abrar(2), Nur Saumi Indana Zulfah(3), Rahmat Gian Nanda(4), Aprilia Tri Purwandari(5),


(1) Universitas Al Azhar Indonesia
(2) 
(3) Universitas Al Azhar Indonesia
(4) Universitas Al Azhar Indonesia
(5) Universitas Al Azhar Indonesia
(*) Corresponding Author

Abstract


Occupational Safety and Health is an issue that is currently attracting a lot of attention from various organizations because it covers issues from the human aspect, economic costs and benefits, legal aspects, accountability and the image of the organization itself. In this research, efforts to prevent work accidents will be carried out using the Hazard Identification Risk Assessment and Detection Control (HIRADC) method. This research aims to determine and analyze hazard identification using the HAZOP method, determine risk control, and determine risk assessment for occupational safety and health. Hazard identification is carried out with the aim of determining the potential danger of a material, tool, or system (Department of Occupational Safety and Health. HAZOP is a systematic safety study, based on a systemic approach towards safety assessment and the process of operating complex equipment, or production processes. Based on the results of the hazard identification carried out on namely slipping, falling, being hit by a tree, etc. Risk control efforts that will be carried out in give danger signs, wear PPE and so on.

Full Text:

PDF

References


G. E. M. Soputan, B. F. Sompie, & R. J. M. Mandagi, “Manajemen Risiko Kesehatan dan Keselamatan Kerja (K3) (Study Kasus Pada Pembangunan Gedung SMA Eben Haezar),” Jurnal Ilmiah Media Engineering, vol. 4, no. 4, pp. 229–238, 2014.

A. Ivana, B. Widjasena, & S. Jayanti., “Analisa Komitmen Manajemen Rumah Sakit (RS) Terhadap Keselamatan dan Kesehatan Kerja (K3) pada RS Prima Medika Pemalang,” Jurnal Kesehatan Masyarakat, vol. 2, no. 1, pp. 35-41, 2014.

N. Wahyuni, B. Suyadi, & W. Hartanto, “Pengaruh Keselamatan Dan Kesehatan Kerja (K3) Terhadap Produktivitas Kerja Karyawan Pada PT. Kutai Timber Indonesia,” Jurnal Pendidikan Ekonomi: Jurnal Ilmiah Ilmu Pendidikan, Ilmu Ekonomi dan Ilmu Sosial, vol. 12, no. 1, p. 99, 2018, doi: 10.19184/jpe.v12i1.7593.

Y. Endriastuty & P. R. Adawia, “Analisa Hubungan Antara Tingkat Pendidikan, Pengetahuan Tentang K3 Terhadap Budaya K3 Pada Perusahaan Manufaktur,” Jurnal Ecodemica, vol. 2, no. 2, pp. 193-201, 2018.

H. Alexander, S. Nengsih, & O. Guspari. “Kajian Keselamatan dan Kesehatan Kerja (K3) Konstruksi Balok Pada Konstruksi Bangunan,” Jurnal Ilmiah Poli Rekayasa, vol. 15, no. 1, 2019.

S. Irawan, T. W. Panjaitan, & L. Y. Bendatu, “Penyusunan Hazard Identification Risk Assessment and Risk Control (HIRARC) di PT X,” Jurnal Titra, vol. 3, no. 1, pp. 15-18, 2015.

S. P. Aprilia, B. Suhardi, R. D. Astuti, & I. Adiasa. “Analisis Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard and Operability Study (HAZOP) : Studi Kasus PT. Nusa Palapa Gemilang,” Performa: Media Ilmiah Teknik Industri, vol. 19, no. 1, pp. 1-8, 2020, doi: 10.20961/performa.19.1.39385.

D. P. Restuputri & R. P. D. Sari, “Analisis Kecelakaan Kerja dengan Menggunakan Metode Hazard and Operability Study (HAZOP),” Jurnal Ilmiah Teknik Industri, vol. 14, no. 1, pp. 24-35, 2015.

I. Rahmanto & M. I. Hamdy, “Analisa Resiko Kecelakaan Kerja Karawang Menggunakan Metode Hazard and Operability (HAZOP) di PT PJB Services PLTU Tembilahan,” Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT), vol. 1, no. 2, pp. 53–60, 2022.

W. D. Ihromi, A. W. Putri, D. Safitri, N. M. A. A. Dewi, P. P. Anwar. “Identifikasi Risiko Pada Ud Laksana Jaya Bordir Dengan Metode Hazard And Operability Study (HAZOP),” Neraca: Jurnal Ekonomi, Manajemen dan Akuntansi, vol. 2, no. 1, pp. 42-57, 2023.




DOI: http://dx.doi.org/10.36722/exc.v2i1.3750

Refbacks

  • There are currently no refbacks.