Reliability Control Program Turbo Compressor 2222254-1 Nitrogen Generation System Pesawat Boeing 777-300ER di PT GMF AeroAsia Tbk

Cipto Riswanto, Edi Sofyan, Ferry Setiawan, Edy Noerachman, Ibny Nazarullah

Abstract


The pilot report case of Garuda Indonesia's Boeing 777-300ER aircraft that occurred in 2018-2019 was mostly a case of Nitrogen Generation System (NGS) failure. The objective of this research is to identify the dominant factors causing failures in the NGS, evaluate the reliability and failure rates of its components, so as to obtain the estimated time the component may will fail, effective scheduled maintenance, maintenance method design, and the estimated primary cost of the maintenance program and reliability control program for its components within one year. The research methodology using Quantitative analysis’s Distribution Test - Life Data Analysis method combined with the Anderson Darling index of fit parameter of Least Square Curve Fitting approach and Qualitative analysis involves identifying potential root causes and the effects of failures, as well as determining maintenance actions using Failure Mode and Effect Analysis and Fault Tree Analysis. Based on the analysis results obtained, the dominant factor causing failures in the NGS for the period is the variation failure of Turbo Compressor. This component has a reliability of 28.73%, and the mean time to failure (MTTF) is 10,477.62 flight hours. As a result, the optimum interm action preventive maintenance interval (pre-modification) of Turbo Compressor NGS is 250 flight hours with a reliability of 90%, requiring preventive maintenance to be performed 35 times per year. The recommended maintenance action is a scheduled restoration task aimed at upgrading and modifying the Turbo Compressor. The estimated cost of scheduled maintenance for the Turbo Compressor NGS is Rp 2,632,913,890.35, and unscheduled maintenance costs Rp 5,354,508,684.42.

Keywords – Reliability, Failure, Maintenance, Turbo Compressor, Nitrogen Generation System.


Full Text:

PDF

References


A. Musfarid,; E. Cordova; Noerachman, Evaluasi Keandalan Sistem Mesin Kontrol Bahan Bakar Pada Pesawat Boeing 737 Classic Garuda Indonesia [Skripsi], Surabaya: ITS Teknik Fisika, 2011.

Boeing, “B777-300ER Aircraft Maintenance Manual (AMM): Safety Data Sheet (SDS) ATA Chapter 47 Inert Gas System,”.

PT Garuda Maintenance Facility Aero Asia Tbk, Mengoptimalkan Momentum untuk Perbaikan Fundamental dan Kestabilan, Jakarta: PT Garuda Maintenance Facility Aero Asia Tbk, 2021.

C. E. Ebeling, An Introduction to Reliability and Maintainability Engineering, McGraw Hill: Universitas Michigan, 1997.

N. A. Naya, “Penentuan Jadual Perawatan Dan Pengadaan Komponen Kritis Pada Mesin Untuk Meminimasi Biaya Produksi,” Universitas Islam Indonesia, Yogyakarta, 2011.

N. Djamal and R. Azizi, “Identifikasi dan Rencana Perbaikan Penyebab Delay Produksi Melting Proses dengan Konsep Fault Tree Analysis (FTA) di PT. XYZ,” Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 1, no. 1, pp. 34-45, 2015.

Garuda Indonesia Airline, Fleet Reliability Report, Report FRR/GA/1219, Tangerang: GMF Reliability and Engineering Services, Tangerang,, 2019.

Boeing, B777-200/300 Fault Isolation Manual: Chapter 47 Inert Gas System, Amerika Serikat,: ECCN 9E991 Boeing Proprietary, 2022.

N. Ansoril and .. M. m. Mustajib, “Sistem Perawatan Terpadu,” Ruko Jambusari, Yogyakarta, 2013.

F. Setiawan, D. M. C. Putra and E. Sofyan, “Analisis Reliability Sistem Starter Valve Untuk Merencanakan Aktivitas Maintenance Pada Pesawat Boeing 737 Next Generation Di Pt Gmf Aeroasia,” Teknika STTKD, vol. 6, no. 2, pp. 92 - 103, 2020.

Boeing, “Service Letter Nitrogen Generation System (NGS) Turbo Compressor Improvement. Report 747-SL-47-005,” Boeing Commercial Airplanes (BCA) Customer Support, Amerika Serikat, 2022., Amerika Serikat, 2022.

A. Soedira, A. Soedira and K. Roz, “Analisis Reliabilitykomponen Kritis Electric Submersible Axial Flow Pumpberkapasitas 2000 Liter Per Detik Menggunakan Probability Plotdan Root Cause Analysis,” JurnalTeknik Mesin, vol. 10, no. 2, pp. 151 - 160, 2022.




DOI: http://dx.doi.org/10.36722/sst.v9i2.2517

Refbacks

  • There are currently no refbacks.


LP2M (Lembaga Penelitian dan Pengembangan Masyarakat)

Universitas AL-AZHAR INDONESIA, Lt.2 Ruang 207

Kompleks Masjid Agung Al Azhar

Jl. Sisingamangaraja, Kebayoran Baru

Jakarta Selatan 12110

Visitor

 This work is licensed under CC BY 4.0