Perancangan Filament Extruder pada Mesin Pengolah Sampah Plastik Terintegrasi “Creatics” Menggunakan Metode TRIZ dan AHP

Aprilia Tri Purwandari, Dicky Sumantri, Niken Parwati, Ahmad Juang Pratama

Abstract


3D printer technology is being widely used in various manufacturing industries. 3D printers can produce three-dimensional products made of plastic sheets with a certain diameter called filaments. 3D printer filaments that are widely used are made of Acrylonitrile Butadiene Styrene (ABS) plastic. The purpose of this research is to develop a Creatics plastic waste processing machine to produce products in the form of filaments that can be used as materials in 3D printers, so that they have more economic value and are environmentally friendly. Creatics machine is an integrated plastic waste processing machine that converts plastic waste into recycled products. In this study, the Teorija Rezhenija Izobretatelskih Zadach (TRIZ) method is used as a product development method to determine product specifications that are able to generate new ideas by eliminating contradictions and using innovative principles that can produce creative solutions. In the process of selecting alternative concepts, the Analytical Hierarchy Process (AHP) decision-making method is used. The results obtained by the TRIZ method are important parameters and need to be prioritized in designing a filament extruder, namely product reliability, energy use from moving objects, and product strength. The product design chosen based on the AHP method is a filament extruder made of stainless steel to be resistant to rust and utilizes the fan in the filament cooling process.

Keywords - AHP method, Creatics machine, Filament extruder, Plastics waste, TRIZ method


Full Text:

PDF

References


F. Prayoga, 27 November 2018. [Online]. Available: https://nasional.okezone.com. [Accessed 19 Februari 2021].

N. Parwati, R. Nurdina, A. T. Purwandari and W. N. Tanjung, “Prototype Design of Plastic Waste Processing Equipment,” in 12th ISIEM (International Seminar on Industrial Engineering & Management), Malang, 2020.

A. T. Purwandari, A. Ratnamirah, N. Parwati and W. N. Tanjung, “Determining Optimum Eco Paving Block Compositions by Using Factorial Design Method,” IOP Conference Series: Materials Science and Engineering, vol. 847, no. 1, 2020.

S. B. W. B. Andersson T, “Degradation of polyethylene during extrusion. II. Degradation of low-density polyethylene, linear lowdensity polyethylene, and high-density polyethylene in film extrusion,” Journal Applied Polymer Science, vol. 91, p. 1525–1537, 2004.

A. D. Putri, N. R. As’ad and H. Oemar, “Perbaikan Kualitas dengan Menggunakan Metode TRIZ untuk Meminimasi Cacat pada Proses Pembuatan Al-Qur’an di PT Sygma Exa Grafika,” in Seminar Penelitian Sivitas Akademika Unisba, Bandung, 2018.

A. Haq and J. J. Aditio, “Identifikasi Kebutuhan Konsumen Produk Mobil Etios Valco Di PT. TMMIN,” Jurnal Al-Azhar Indonesia Seri Sains dan Teknologi, vol. IV, no. 4, pp. 156-165, 2018.

D. Puspitarini, A. Suzianti and H. Al Rasyid, “Designing A Sustainable Energy-Harvesting Stairway: Determining Product Specifications Using TRIZ Method,” in Urban Planning and Architecture Design for Sustainable Development, Lecce, 2016.

R. Prabowo and S. Wijaya, "Integrasi New Seven Tools dan TRIZ (Theory Inventive Problem Solving) untuk Pengendalian Kualitas Produk Kran (Studi Kasus: PT. Ever Age Valves Metals-Wiringanom, Gresik)," Jurnal Teknik Industri, vol. 10, no. 1, pp. 22-30, 2020.

K. G. Sidanta, W. Budiawan and Sriyanto, "Redesain Alat Bantu Press Tahu dengan Menggunakan Metode Quality Function Deployment (QFD) dan Teorija Rezhenija Izobretatelskih Zadach (TRIZ)," Jurnal Teknik Industri UNDIP, vol. 5, no. 3, pp. 1-9, 2016.

S. Sunarsa and R. I. Handayani, “Sistem Pendukung Keputusan Pemilihan Laptop untuk Karyawan pada PT . Indotekno dengan Menggunakan Metode Analitycal Hierarchy Process,” Junal Ilmu Pengetahuan dan Teknologi Komputer, vol. II, no. 1, pp. 5-10, 2016.

T. A. Pachemska, M. Lapevski and R. Timovski, “Analytical Hierarchical Process (AHP) Method Application in The Process of Selection and Evaluation,” in International Scientific Conference“UNITECH 2014”, Gabrovo, 2014.




DOI: http://dx.doi.org/10.36722/sst.v7i2.1041

Refbacks

  • There are currently no refbacks.


LP2M (Lembaga Penelitian dan Pengembangan Masyarakat)

Universitas AL-AZHAR INDONESIA, Lt.2 Ruang 207

Kompleks Masjid Agung Al Azhar

Jl. Sisingamangaraja, Kebayoran Baru

Jakarta Selatan 12110

Visitor